Lexus GS300 Key 1998 to 2005 – Key cutting and Programming

Aftermarket lexus repalcement or Flip Key conversion to suit  : Lexus GS300, RX350,IS200

4C – TOY13, Toy40 – short laser key

We program the transponder on the vehicle with specialist equipment.
Products, cutting and Programming charges are included for this key.

Description

Lexus GS300 Key 1998 to 2005 – Key cutting and Programming blade replacement

Make / Model From To  Reference ID
Lexus GS300 1998  2005  TOY13, Toy40 – short laser key 4C-TEXAS
Lexus RX350 2001 2004 TOY13, Toy40 – short laser key 4C-TEXAS
Lexus IS200 – XE10 1998 2005 TOY13, Toy40 – short laser key 4C-TEXAS

Key Cutting

toy-13-or-toy40-lexus-laser-short

Blade – Toy40 Lexus Replacement Key cases.


 

 

 

 

 

 

 

 

 

 

 

Blade 

Toy13

We cut and Program Lexus non flip keys and flip keys in house , be sure to have your spare key handy we can clone and program all keys at the same time.

*Key Programming 

The programming of this vehicle is done by scan tool only, it requires a Master key to add in extra keys, or the pain steaking way is to remove the engine ecu and read the chip on board to produce a master key, if all keys are lost or master key needed, other key is available, you can clone 4C chip with TPX1
This transponder can be cloned with the vehicle present using a TPX1 Cloneable chip.

wp_20160922_12_22_47_pro

 

 

*Remote programming

  1. Open the driver’s door, all other doors should be closed.
  2. Insert key into ignition then remove it.
  3. Press the LOCK then UNLOCK on the vehicle lock control switch  5 times.
  4. Close and open the drivers door.
  5. Press the LOCK then UNLOCK on the vehicle lock control switch  5 times.
  6. Insert key into ignition switch.
  7. Switch ignition ON and OFF, as follows :-
    Ignition ON and OFF 1 time = ADD remote, but do not delete existing.
    Ignition ON and OFF 2 times = ADD remote, but delete all existing remotes.
    Ignition ON and OFF 3 times = Check how many remotes are programmed.
    Ignition ON and OFF 5 times = ERASE all remote controls programmed.
  8. Remove key from ignition switch. (The vehicle locks should cycle the number of times that you have turned the ignition ON and OFF for).
  9. Press and hold LOCK and UNLOCK buttons on the new remote together for 2 seconds.
    then Press and hold the LOCK button for another 2 seconds.
  10. The vehicle locks should cycle once to confirm or twice to indicate an error.
  11. Repeat for each remote control and then insert key into ignition or close drivers door to exit programming.

Lexus GS300 Key 1998 to 2005 – Key cutting and Programming KEY DIY – Flip Key

B series remotes

wp_20160922_12_23_02_pro