SELECT
1. Remote Function Actuation (RFA)
2. Special Function
Before continuing, ensure there are no DTC’s present and battery is fully charged.
ADD ADDITIONAL REMOTE
This procedure will not erase a remote not present. It will add a remote without
affecting others.
Turn ignition On and press Enter
Dash will beep and the scan tool displays remote key No. 1,2,3,4
Each remote will display Programmed or Not Programmed
Whilst on this screen hold down the lock and unlock buttons on the remote you
wish to program for approximately 10 seconds until you hear 2 beeps and the scan tool
screen displays programmed.
ERASE AND REPROGRAM REMOTE
This procedure will erase all remotes other than the one that is used.
Turn ignition on and press Enter
Dash will beep and the scan tool displays remote key No. 1,2,3,4
Each remote will display Programmed or Not Programmed
Whilst on this screen hold down the lock and unlock buttons on the remote you
wish to program for approximately 10 seconds until you hear 2 beeps and the scan tool
screen displays programmed.
To program any additional remotes you must now return to the previous menu
and Add an additional remote.