Holden Captiva 2011 – P0011 & P0016 intake valve timing issues

Vehicle

Holden Captiva series 2, 2011, 2.4L 4 cylinder engine.

Symptom

Vehicle came in with check engine light on and complaint was, that the engine was shaking when idling after going for a drive, he left the vehicle sit over night at home drove the next day and no issues after leaving it over night.

Being that the engine light was on the instrument cluster we connected the scan tool and conducted a test drive.

Read More

Sky over the workshop from yesterday

Sky over the workshop from yesterday




Source

This is what it looks like when you find a bent axle in a live axle and the diff housing is not bent




Source

#bendix #junk #alwayswarpingrotors

#bendix #junk #alwayswarpingrotors


Source

Vehicle

Hyundai Accent 2007 with a G4ED 1.6l Engine.

Symptom:

Upon driving the vehicle with a misfire in the engine back to the workshop, stopping we had found the exhaust to be glowing

Read More

After and before starter motor testing, it’s easy when you have the tools

After and before starter motor testing, it’s easy when you have the tools




Source

I’ll just leave this here

I’ll just leave this here




Source

Mazda I-Stop Reset

On CX5s and other Mazda’s with the i-stop system, i-stop may not activate after the battery has been replaced or was disconnected during some servicing.

In this case you will either need to ask your dealer to reset it, which they can by connecting up to the diagnostic system, or you can do it yourself. listed below

Read More

SafeTstop & Bosch Service


Testing brakes on all cars, any day…
how well do your brakes work?




Source

Nissan Navara D40 – Clutch pedal box and firewall repair plate, CAD model & PDF

D40 clutch firewall re-enforcement plate.

2 cars in the same week have been brought to us to repair the firewall due to clutch pedal box cracking apart and the firewall cracking, surely this is a common issue so we spent a little time on the internet looking for a repair procedure and came up with nothing, so during the first repair the decision was made to 3d model the part and upload it so next time it happens there is any easy way to find the fabricated plate, and also to show the issues that are effected with the vehicle.

Read More